Installing a water fountain pump is a great way to add a beautiful and tranquil effect to any outdoor space. Whether you’re looking for a charming centerpiece for your garden or want to create a soothing atmosphere for relaxation, a water fountain pump would be a great addition.
Not only that, but it can create a peaceful atmosphere for entertaining guests. However, it cannot be easy to know where to start.
In this blog post, I’ll cover the necessary materials, tools, and steps to help you complete the installation process.
I’ve got you covered with this step-by-step guide! It’ll show you exactly what to do to get your water fountain pump running.
This includes collecting supplies, turning off the power, connecting the pipes, testing the pump, and more. So by the end of this blog post, you will be well-equipped to install your water fountain pump.
Installing a Water Fountain Pump Is Easier than You Think – Here’s What You Need
- Decide where you want to install your fountain – make sure there is an electric outlet nearby.
- A fountain kit or a solar-powered fountain kit depending on your preference.
- 3. A filter box and water pump to move the water.
- Depending on the size and shape of your fountain, you may need additional tools such as a drill, screws, and anchors for installation.
- When installing a tabletop fountain, you’ll need to ensure the area is level and stable before setting it up.
- Finally, follow the manufacturer’s instructions carefully when installing your fountain pump.
6 Steps for Installing the Water Fountain Pump
You can follow our 6 steps to ensure the fountain pump is installed correctly and optimally.
Step #1: Choose Your Fountain Location
Choosing the right location for your water fountain is the first step in the installation process. When selecting a spot, consider factors such as sunlight, space, and proximity to any power sources you may need.
You should also ensure the area is flat and level so your fountain can stay upright and stable. Once you’ve found the perfect spot, mark it with a stake or spray paint, so you know exactly where to dig your hole.
Step #2: Dig a Hole for the Basin
Now it’s time to start digging! The hole for the basin should be dug to the size and depth specified in the instructions. Make sure that the hole is deep enough.
So that when you place the basin in the hole, it should sit approximately 1″ below grade once the installation is complete. This will ensure that your fountain looks level and has proper drainage.
Step #3: Place the Pump in the Basin
While placing your fountain pump, insert the pump into the basin and pull the hose to the fountain pump properly.
Place your statuary piece into the basin, connecting it with the hose from the pump. Once everything is in place, fill your fountain with water.
Step #4: Secure the Tubing
Now you are ready to secure the tubing to the pump. Thread the tubing from the pump through the center hole in the bottom of the saucer.
Secure it to the copper connection using clear vinyl tubing. Make sure that everything is securely in place, and then plug it in, and you are ready for the next step of adding water to your fountain.
Step #5: Connect the Pump to a Power Source
Now that you have the pump installed and secured, it’s time to connect it to a power source. Depending on the type of fountain you’re installing, you might need to use an electrical cable or a solar panel.
You can easily install an AC submersible pump anywhere with an existing power source. Manufacturers can even install them without needing to cut any wires. You can read the guide to properly wair water fountain pump.
Be sure to plug the pump into a GFCI outlet before turning it on. You’ll need to ensure that the pump is safely connected and secure before your fountain is ready for use.
After connecting the power source, take one last look at your fountain setup to ensure everything is in place before you turn on the pump and enjoy your new water feature!
Step #6: Add Water to the Basin
Before filling the water in the fountain, ensure the inside of the basin is clean. Remove any dirt or debris that has entered the basin using a soft cloth or brush.
Then, add clean water into the basin until the water level is 6 inches deep. This will ensure that your pump runs with proper water circulation and pressure.
You should not fill the basin too full as this can cause overflow. Once you have added enough water to your fountain, check your pump for leaks or blockages before turning on the power.
Pro Tips: If your fountain pump does not flow water smoothly, you can read the guide control water flow in a fountain.
Here is the link to a video to help you follow along🙂
Water Fountain Pump Replacement Cost
Replacing your water fountain pump can be costly, with prices ranging from $1,000 to $4,000. To save money, you can buy a replacement fountain pump and install it yourself.
Sunnydaze Decor offers the largest selection of fountain pumps at The Home Depot, with prices ranging from $10 to $400.
If you choose to have a professional install the pump, the average cost is typically between $1,000 and $2,750. Submersible pumps usually cost between $250 and $1,200, depending on the horsepower required for your well.
Final Thoughts
Installing a water fountain pump is relatively easy if you have the necessary tools and supplies. You should follow the manufacturer’s instructions carefully to ensure proper installation and safe operation of the pump.
However, with the right steps and a little patience, you can easily install a water fountain pump and enjoy the soothing sound of bubbling water in your outdoor space.
